HDMI HDBaseT Matrix Switch 8X8, Single CAT6 / 3D, Ethernet, POE and IR With 4K Support

Model: SW-HBT4K-C6-8X8E



0 Review(s)

Starting at: Buy In Store

UPC Code: 606825935529

Overview

The Avenview SW-HBT4K-C6-8X8E Matrix Switcher provides a flexible and convenient method of controlling 8 sources to 8 displays over different formats. Creating a multi input device which supports inputs of HDMI, and outputs of HDMI and HDBaseT™. This unit serves in all enviroments besides functioning as a matrix, the matrix can be useful as a converter or an extender. Easily controlled via front-panel buttons, IR remote control, RS-232, Telnet and IP Control, with all information including system status presented on its LCM display.

 

 

Features

 

  • HDMI, HDCP and DVI compliant
  • Inter-changeable input and output boards
  • Create-Input and output module types can be mixed - increment of 8
  • Configure-8x8 up to 16x16 with HDMI, DVI, CAT5e/6/7 and VGA interfaces
  • Audio - LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
  • Resolution supported PC resolutions from VGA to WUXGA
  • Resolution supported HDTV resolutions from 480i to 1080p
  • INPUT/OUTPUT HDMI Direct-resolution 1080p/8-bit and 12-bit Cable Lenght 15m/15m (8-bit) and 10/10m (12-bit) away
  • HDMI Output
  • Over CAT5e/6/7 cable length with a resolution 1080p/8-bit and 12-bit the can be 100m away
  • Control Options-RS-232, Telnet and Web GUI controls
  • Supports redundant power supply
  • EDID modes support:
    - Standard mode: Factory default
    - Automatic mode: Takes EDID from the lowest output
    - Manual mode: Assigns any output to any input port
  • HDBaseT 5Play™ convergence: Video, Audio, PoE, Ethernet & Control (IR & RS-232)

Please Note:
- The PoE function is designed for powering compatible Receiver units only.
- The non-PoE Receivers has to be powered with a power supply.
- Receivers (Rx) from different manufactures would not be compatible.
- Displaying HDMI 4Kx2K resolution would require the standard 4Kx2K HDMI cable and display for accurate results.

Technical Specifications

 

ITEM

DESCRIPTION

UNIT

SW-HBT-C6POE-8X8E

UNIT DESCRIPTION

HDBaseT HDMI Modular Matrix Switcher with IR/RS232/POE/4k2k support

HDCP COMPLIANCE

Yes

VIDEO BANDWIDTH

Depending on Cards Range from

225 MHz (6.25Gbps)300 MHz (10.2Gbps)25-340MHz

 

SUPPORTED RESOLUTIONS

Refer to the User Guide

AUDIO SUPPORT

LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio

INPUT

8 x HDMI or DVI or CAT5e/6/7 or VGA connector

1 x 3.5mm (RS-232) 2 x 3.5mm (IR Receiver)1x RJ45

OUTPUT

8 x HDMI or DVI or CAT5e/6/7 or VGA connector

1 x 3.5mm (IR Blaster) 1x DVI/HDMI Local Output

RJ45 CONNECTOR

WE/SS 8P8C with 2 LED indicators

SWITCHING SPEED

±8 kV (air-gap discharge)
±4 kV (contact discharge)

ESD PROTECTION

32 Lbs

DIMENSIONS (L X W X H)

19" x 19" x 5.7"

POWER SUPPLY

2 x AC 110-240V (US/EU standards, CE/FCC/UL certified)

POWER CONSUMPTION

TBA

ENVIRONMENTAL

OPERATING TEMPERATURE

32° ~ 104°F (0° to 40°C)

STORAGE TEMPERATURE

-4° ~ 140°F (-20° ~ 60°C)

RELATIVE HUMIDITY

20~90% RH (no condensation)

 

 
 
No Videos Available
Please contact us for softwares
  • Model: SW-HBT4K-C6-8X8E
  • Shipping Weight: 40lbs