The FO-HDSDI-L-SET is an ideal and economic solution designed for transmission of multi-rate SDI video, with embedded audio and metadata over a multi-mode fiber optic cable. The transmitter module (FO-HDSDI-L-S) receives one HD/SDI electrical input, perfectly converts SMPTE 292M SMPTE 259M or DVB-ASI electrical SDI signal to multi-mode optic SDI signals. The receiver module receives optical signal from input LC connector, and then perfectly converts it to electrical SDI signal.
Both transmitter and receiver provide equalizing and reclocking at input unit in order to re-construct the signal for consistent quality. The FO-HDSDI-L-SET is perfect for todays broadcast applications, including video production, video editing, studio to studio and studio to CATV head end. In addition, since transmission of content is inherently secure and immune to outside interference, ber applications are favored in government, military, and medical environments.
Model
FO-HDSDI-L-S
FO-HDSDI-L-R
Transmitter (TX)
Receiver (RX)
SDI Standards
SD-SDI & HD-SDI
Auto HD/SD-SDI Detection
Yes
Supported Protocols
SMPTE 259M (270Mbps / 360Mpbs), DVB ASI (270Mbps) SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)
Video Bandwidth
[1.485Gpbs & 1.485/1.001Gbps]
Data Rates
270 / 1483 / 1485 Mbps
Supported Video
[HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30 [SD] NTSC@59.94Hz, PAL@50Hz
SDI signal type
SMPTE-292M, SMPTE-259M, DVB-ASI
Output impedance
75W
Auto Reclocking Mode
Automatic detection: 270Mbps / 1.483Gbps / 1.485Gbps Automatic bypass: 177Mbps / 360Mbps / 540Mbps
Cable equalization
[HD-SDI] up to 150m (500ft) [SD-SDI] up to 300m (1000ft)
[HD-SDI] up to 125m (410ft) [SD-SDI] up to 300m (1000ft)
Loop Out
1 re-clocking SDI Loop Out
Audio support
RP-918 pathological patterns
Immune
Input Connectors
1x BNC (SDI)
1 x Optical LC (SDI)
Output Connectors
1x Optical LC (SDI) 1 x BNC (SDI û Loop Out)
2 x BNC (SDI)
BNC connector
75W inter-locked socket
Optical Fiber Connector
LC Type
Fiber Optics
Wavelength: 850 nm Extinction ratio: 8-10 Overshoot < 10% Optical power: -4 to -10 dBm Type: Multi-mode Jitter < 0.2 UI Rise/fall < 500 pS Receiver sensitivity: -17 dBm
Dimensions
4.3ö x 1.6ö x 1.2ö (L x W x H)
Weight
155g
Power Supply
5V 4A DC
Power Consumption
5 Watts (max)
Operating Temperature
0~40?C [32~104?F]
Storage Temperature
-20~60?C [-4~140?F]
Relative Humidity
20~90% RH [no condensation]
Product Categories
