Total : $0.00USD
The Avenview SW-HDM3D-C6-8X8E, HDMI 3D Matrix Switch over single CAT-5/6 with IR Pass-Through provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1 channel) digital audio from any of the eight HDMI sources to the remote eight (8) displays at the same time.
Through low cost Cat5/6 UTP cables, not only high quality video and audio can be transmitted to the display sites, but also users can switch among eight HDMI sources using the Front Panel buttons, RS-232, IR remote and now Ethernet via CPU or Laptop remotely over the network. With single UTP design at the source site, each rremote module is easily installed with bi-diectional IR control and 5V locking power adapter. This function makes it easy for users at the display gain access and control to the DVD player, Cable Box or any HDMI/IR supported devices directly.
8X8 HDMI Matrix Switch with 3D single CAT6
HDMI Matrix Switch Receiver with 3D single CAT6
Single Link 225 Mhz (6.75Gbps)
480i / 480p / 720p / 1080i / 1080p60
Full HD: (1080p) ~ 35meter (115feet) (CAT5e) / 40meter (130feet) (CAT6)
HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) / 55meter (180feet) (CAT6)
Surround Sound (up to 7.1 ch) or Stereo Digital Audio
8-level Digital Control at Receiver Unit
1.2 Volts (peak-to-peak)
5 Volts (peak-to-peak, TTL)
 Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]
 Core chipset — ±8kV
8 x HDMI
1 x RS232
1 x RJ45 HDMI Signal
1 x RJ45 IR Signal 1 x Ethernet
8 x RJ45 HDMI Signal
8 x RJ45 IR Control
9 x IR Socket for IR Transmitter
1 x HDMI
1 x IR Socket for IR blaster
Push Button / IR Remote / RS232 /Ethernet
Controllable via IR Pass -through from IR RX to IR blaster at TX
17" x 11.4" x 1.7"
3.3" x 3.5" x 1"
12V 5A DC
5V 2A DC
20 Watt (max)
1 Watt (max)
20 ~ 90% RH (no condensation)
Avenview provides the Pro AV industry with a comprehensive range of AV components for the management and distribution of video signals. Our philosophy is simple – to give installers and integrators the tools they need to create outstanding installations and excellent end user experiences.
9:00am - 5:00pm (Eastern Time Zone)
Monday to Friday