Description

PRODCUTS DETAILS
DIAGRAM
USER GUIDE
SUPPORT

Overview

The CTRLPRO-MIP-V4 puts centralized command of your entire AV over IP infrastructure in one place. Simply connect it to the same local network as your transmitters and receivers to instantly gain unified control over channel routing, unicast and multicast switching, video wall configuration, and matrix management — all through an intuitive WebGUI accessible from any browser or directly via HDMI display and USB keyboard. Define zones, build presets, and switch routes across multiple video environments with a few clicks, eliminating the need to configure each extender individually. Real-time visibility into every connected unit — IP addresses, netmask, and status — keeps operators fully informed at all times. A built-in trigger input interface allows customized keypads or remote control devices to be mounted in podiums, conference tables, or classrooms, putting preset recall at users’ fingertips. Full control is available via WebGUI, RS-232, Telnet, IR remote, and trigger inputs — because in mission-critical environments, control has to be total.

Technical Specifications

Item	Specification / Details
Interfaces
Output Port	1 HDMI (Type-A)
Control I/O	1 IR Extender (3.5mm) 1 RS-232 (3-pin Terminal Block) 8 Trigger (10-pin Terminal Block) 1 USB (Type-A) 2 LAN (RJ-45)
Reserved Port	1 RS-232 (5-pin Terminal Block)
Video
HDMI Compliance	1.4
Output Signal Type	1920x1080p@60
Resolutions
Maximum Output HDMI	1920×1080p@60
Power
Power Supply	5V/2.6A DC (Locking)
Power Consumption	2.99W
Enclosure
Chassis Material	Metal (Steel)
Chassis Color	Black
Dimensions (W×H×D)	231.5mm×25mm×108mm [Case Only] 231.5mm×25mm×117mm [All Inclusive]
Weight	648g
Field Firmware Update	USB Flash Drive, WebGUI